Wireless N+

[mredskins]

Originally Posted by cpayne5

It may be an interference issue.

From an earlier post, I said...
"Also note that 802.11n uses 2 channels (40MHz in total, for those keeping score at home), so if you live in a congested area, you may run into noise problems with neighboring 802.11b/g/n devices."

802.11 has 12 channels in the US. Of those 12, only 3 are non-overlapping at 20MHz channel widths (b/g). So, theoretically, if you see 4 SSIDs, there is interference on at least one channel (and with devices coming from the factory set to channel 6, they all may be using the same channel!). N uses 40MHz channel widths, so you do the math on how much noise there may be on the 2.4GHz spectrum if all your neighbors are using N too.

You can change the channel on which your device operates. Do a site survey, ie look at all the SSIDs visible from your device, and note their signal strength and channel number. Set your device to use an empty channel, or a channel with the lowest signal if a device is already operating on that channel.

you may be right but is now back in the return pile at Best Buy. I am getting FIOS at the end of summer I will re-visited the issue after the install.